Why adjust the frame of the ultrasonic plastic welding machine? That is because the appropriate height is more suitable for our operators to carry out the processing technology, so the adjustment of the frame of the ultrasonic plastic welding machine in Dongguan requires certain requirements and operational procedures to achieve the best results. Here are the adjustment methods:
1. Adjust the air pressure to a pressure higher than 1.5 kg (20PS);
2. Adjust the manual/automatic switch on the machine panel to the manual position, and press the ultrasonic welding machine to start the ultrasonic mold drop at the same time. “At this time, the ultrasonic mold (welding head) is in the falling state”
3. Place the ultrasonic bottom mold (put the plastic parts into the bottom mold first) onto the workbench under the ultrasonic mold (welding head) and loosen the handle of the locking frame;
4. The height of the shaker adjusts the hand wheel so that the ultrasonic mold (welding head) is in conformity with the top surface of the plastic part; the frame is locked, and the bottom mold is fixed by the splint.
5. Retract the drop stroke adjustment (limit) screw by 1~2 mm and lock the screw with a nut.
6. Press the ultrasonic welding machine emergency stop switch again, and the ultrasonic mold rises. "At this time, the ultrasonic mold (welding head) returns to the suspended state"
Dongguan Yihui Machinery Equipment Co., Ltd. has been engaged in the ultrasonic industry for many years and its performance is relatively stable and mature. The welding equipment mainly adopts mature technology such as Taiwan's self-excited oscillation circuit, and the output is strong and stable, the protection is perfect, and it is sturdy and durable. The core components such as transducers are imported from Japan and West Germany, with long service life and excellent performance. It is a good helper for your production! Welcome to inquire!
相关标签：