With the development of China's mechanical technology industry, mechanical innovation is also more and more high-tech, then today Xiaobian will bring you an article about ultrasonic molds, do you know the steps of ultrasonic mold debugging? ? It doesn't matter, next, Xiaobian will introduce it to everyone, let's take a look.
Ultrasonic plastic welding machine mold debugging is a relatively difficult task, if the debugging is not good, it will directly affect the later use. Therefore, we must do a good job of debugging before using the ultrasonic plastic welding machine. So what are the steps in the debugging of ultrasonic plastic welding machine?
First, turn on the main power supply. This is the first step before all electrical equipment is commissioned and run. After the power is turned on, you can see that many indicators on the power distribution cabinet and equipment are on, and the switch is in position. Initially placed in the off position. Therefore, it is necessary to check whether these instrument devices are in normal working condition before the formal debugging.
Secondly, after the original mold of the ultrasonic plastic welding machine is unloaded, the mold to be debugged is installed, and the loading and unloading and installation work is carried out by means of a special wrench. Also make sure the mold is tightened after installation.
Third, turn on the power of the ultrasonic plastic welding machine, and then press the detection button on the console. At this time, the device will emit ultrasound, which directly reflects whether the mold is intact. So, what kind of sound is a good mold, that is, a crisp and clean sound, without any noise or sharp sound.
Fourth, after debugging, you can close the origin.
I am sure that everyone has a certain understanding of the steps of ultrasonic mold debugging. So today, Xiaobian will not talk to everyone here. If you still have questions, please contact us directly. We will also contact you in the first time to answer.
相关标签：