In order to play the best use of the welder, maintain the performance and safe production of the welder. Every time the machine is used or the welding die is replaced, the vibration level of the welder vibration system and the vibration system must be adjusted. Therefore, the sound wave detection procedure is very important. So, do you understand the importance of the ultrasonic testing procedure for ultrasonic plastic welding machines? It doesn't matter, then Dongguan ultrasonic plastic welding machine manufacturers will come to introduce you, let's take a look.
1. Before the test, both the upper welding die and the ultrasonic vibration head must be tightly locked. Do not touch the workpiece during the inspection.
2. Close the power switch and the power indicator lights up.
3. Open the door page of the side cover.
4. Press the selector switch to the position of the sound detection file and observe the indication value of the amplitude meter. Each sound wave detection switch cannot be pressed continuously for more than 3 seconds.
5. Rotate the sonic wave detection screw to make the amplitude meter pointer at the lowest scale value. Note: The amplitude meter pointer can be adjusted to below 1.2 (or 100) scale value, and the lowest scale position is ensured. The vibration system and vibration system of the welder have the best spectrum.
I believe that everyone has a certain understanding of the ultrasonic wave testing of ultrasonic plastic welding machines. So today, Dongguan ultrasonic plastic welding machine manufacturers will not talk to everyone here, if you still have doubts, then Contact us directly by phone, we will contact you in the first time.
2017-12-09
Mobile web site