Ultrasonic fusion splicer is a welding work using ultrasonic technology, and its use is an effective use of acoustics in the field of physics. It can greatly improve the efficiency of welding without generating noise. Therefore, once promoted, the ultrasonic fusion splicer has been widely praised by users. So do you know about the working steps of the ultrasonic plastic welding machine? It doesn't matter, today Xiaobian will come to introduce you, let's take a look.
Its normal working steps have the following three aspects:
First, the rearrangement of the surface of the weldment. The surface to be welded has a lot of bumps. These bumps are used for melting during welding. When welding, the stress of the ultrasonic welding machine should be concentrated on these points, so that the bumps will be under the action of high temperature. Melting occurs so that its height is level with the height of the surrounding plastic parts. Finally, the effect of tight integration is achieved.
Second, the surface of the weldment is wet. This moist process is not to wet the object with water or the like, but to melt the liquid produced by the high temperature. These liquids will flow to four places, and after expansion, the contact range of the welded plastic parts can be made larger.
Third, under the action of high temperature, a very thin welding layer will be formed on the surface of the welded part. The ultrasonic welding machine can make a large vibration of the welded layer and exert a certain pressure so that the molecules of the two plastic parts can be combined. Together, to achieve overall welding.
I believe that everyone has already understood the working steps of the ultrasonic plastic welding machine. So today, Xiaobian will not talk to everyone here. If you still have questions, please contact us directly. We will contact you in the first time.