clip manufacturers tell you how much material is n

来源: http://www.dgyihuicsb.com/news/29.html

2017-03-07

When we produce a supersonic mold, consider the following reasons:

1. In terms of product requirements, determine the service life and wear rate of the ultrasonic mold, which metal we use.

2. The shape of the product: What kind of welding process is used, the size of the mold is set, and the pressure transmission area is generated. When the product is fused, it may be generated, how much power and function is required. Whether it is possible to complete the work in one weld.

3, the plastic nature of the product: determine the working amplitude of the ultrasonic mold, that work should accept the ultrasonic energy, the form of the energy line, location, size. How to design the contact position when combining different plastics.

The ultrasonic mold making steps are as follows:

1) Understand customer needs

2) Start designing ultrasonic molds

3) Perform vibration mode analysis to ensure that the mold is made OK once.

4) Engineering Department review and confirmation

5) After the completion of the production, frequency test proofreading is carried out to ensure that the mold to the customer can be produced immediately to the client.

6) Machine sample

超音波模具