Dongguan Yihui Machinery Equipment Co., Ltd. provides free information on ultrasonic plastic welding machine...
line
File box press back strip paper card automaton
product name:

File box press back strip paper card automaton

product model:
product brief introduction:

detailed introduction


Adhesive paper composite placement machine
Paper and plastic composite Labeling machine
一 : Introduction of equipment
Equipment workflow:
1:Before the machine starts, first of all need to be placed in the position 4(picture 1) of the adhesive tape coil. And the coil will be wound through position 3,2,1componets to prepare the work(winding method ); at the same time, the required pieces of paper need to be put into the warehouse in picture two,position 9,and adjust the position. 
2: Open the machine, First, manually adjust the panel manual feeding (1), so that the initial coil level without scratches, and then adjust to automatic block, at this time do not need to put the product, need to take the tape film punching position to the knife position; wait for the temperature of hot-pressing die to rise to 115 degrees above when the start of work.
3: Automatic adjustment, Each time the start button is pressed, Part 8 delivers the sheet to a fixed position in Slice Module 2, while Slice Module 2 cuts the sheet to the desired size and overlaps the sheet, and then Component 7 delivers the overlapped sheet of paper and adhesive together to the bottom of the hot-pressing die, and finally carries out the hot-pressing molding.
The entire workflow is in view of the equipment has been adjusted (due to different customer products and other reasons, the need to adjust the corresponding parameters, not described here).
1: Before starting the machine, first place the tape roll in the 4 position of Figure 1 below, and wind the roll through 3, 2, 1 components to prepare for winding (winding method); Insert the film into the library in Figure 2 and adjust the position;
2: Start up, first manually adjust the panel to manually discharge (ie, component 1), so that the initial section of the coil is smooth without scratches, and then adjust to automatic gear. At this time, there is no need to put the product, and the tape coil needs to be punched. Send to the cutter position; wait for the temperature of the hot press mold to rise above 115° to start working;
3: Adjusted to automatic, each time the start button is pressed, the step 8 sends the paper to a fixed position of the slicing assembly 2, while the slicing assembly 2 cuts the film to the desired size and overlaps the sheets, and then the assembly 7 will overlap. The paper and the rubber are conveyed together under the hot press mold and finally subjected to hot press forming.
The entire workflow is based on the fact that the equipment has been adjusted (depending on the customer's product and other reasons, the corresponding parameter adjustment is required, not introduced here).


1:Feeding and cutting components
2:Punching tape side hole components   
3:Roll components
4:Feed components
5:Waste collection cover
6:Hot pressing film welding components

7:Adhesive tape and paper feeding components
8:Paper feed components
9:Paper storehouse components
二:Safety precautions 
1: hot pressing die for heating element, do not touch hands when working, prevent scalding;
2: In the process of automatic operation, do not put hand or other parts of the body into the conveyor structure to prevent clamping;
3: When there is a foreign body under the hot-pressing die, do not use the hand to remove directly, should use a brush and other auxiliary tools to remove, to prevent hand scratches.


time:2019/5/13 0:00:00

related news

line

Automatic flanging and welding machineWhich good? How much is the supply order?Dongguan ultrasonic moldHow about wholesale? Integrity of the company's professional wholesale prices to provide a large number of spotUltrasonic moldAutomatic hemming machineAutomatic binding and folding machineUltrasonic plastic welding machineAnd other high-quality products and prices, welcome to call production customization!

phone: 0769-87568100 facsimile: 0769-87568303 mailbox: 136611273@qq.com

XMLwebsite mapMobile web site Internet Content Provider:粤ICP备17156017号-1

technical support:

service
telephone hotline
Mobile web site