product manual
Product size
Product size: 1750*1600*1800mm
Product weight: 350kg
Air pressure: 0.4~0.8Mpa
Power supply: AC one-way 220V 50/60HZ
Applicable products: length 400 ~ 550 - width 290 ~ 305mm
One: product introduction
The main function of the device is for automatic folding and ultrasonic welding of the four corners of the folder.
Two: the principle of operation
The main process of the equipment: manually place the material in a fixed place (adjust the positioning plate according to the product) - press the control button to achieve folding and welding - take out the material
1: Manually place the material in the space formed by the positioning plate, and proceed to the next step after determining the position is accurate;
2: Press the control switch, press down the fixed plate to press down the fixed material, then fold it by pneumatic components, and finally press the ultrasonic pressure to weld;
3: The welded material is moved upward by the pressing plate, and the second discharging is performed when the material is taken out.
Three: equipment maintenance
1: The whole device should be kept clean to prevent excessive impurities from entering the device and affect the life of the device;
2: The bottom of the punch is kept clean, and no debris (especially hard objects) can exist, which affects the life of the welding head;
Four: safety instructions
This product belongs to the scope of stamping equipment. The strength of the ultrasonic mold is relatively large. Therefore, it is forbidden to place the hand or other non-processed products under the welding head during the operation to prevent pinching and damage to the welding head of the machine.