Dongguan ultrasonic spot welding machine manufacturers operating procedures
1. When the power is turned on, the indicator light is on.
2. Turn on the generator's power switch, the power indicator is on, the output fault indicator is slightly lit, and the power adjustment knob is placed in the minimum position.
3. In use, for some reason, the output fault indicator light is on, and overcurrent protection is generated. At this time, it is necessary to turn off the power, and turn the power adjustment knob counterclockwise. After the power is turned down, the power is turned on again.
4. When the transducer is not allowed to be unloaded, the generator is turned on for a long time, otherwise the heat is likely to damage the transducer.
5. During normal welding, the workpiece to be welded is clamped to the welding fixture, and the foot switch is depressed to perform one welding.
6. Adjust the “Welding Time” knob to increase the clockwise welding time and counterclockwise shortening.
7. Power, time and pressure are three important factors for the welding system. Different specifications of the workpiece require different power. Time and pressure need to be adjusted repeatedly to achieve the best process specifications.
8. After use, turn off the power switch.
Mobile web site